KP35026

Fixed 3.3V Output

Fast Dynamic Response, Meet WIFI Power Supply

Less than 20mW Standby Power

Integrated with Freewheel Diode

Integrated with 500V Power MOSFET and

HV Startup Circuit

Up to 45kHz Maximum Frequency

Multi-Mode Control with Audio Noise Free Operation

Supports Buck and Buck-Boost Topology

Good Line and Load Regulation

Built-in Soft Start

Build in Protections:

Over Load Protection (OLP)

Cycle-by-Cycle Current Limiting (OCP)

Abnormal Over Current Protection (AOCP)

Output OVP

On-chip OTP

Available with SOP-4 Package

KP35026_REV1.02_EN

KP35026VG is a high performance Switch Mode Power Supply Switcher for 3.3V low power off-line application with minimum components in typical buck solution. This IC has built-in high break down voltage MOSFET to withstand high surge input.

Unlike conventional PWM control, there’s no fixed internal clock in KP35026VG to trigger the GATE driver, the switching frequency is changed according to the load condition. The multi-mode PWM control and fast dynamic response circuit are integrated to achieve high dynamic response and good line/load regulation without audio noise generated. The peak current limit changes according to the real load condition for low standby power in no load.

KP35026VG integrates functions and protections of Under Voltage Lockout (UVLO), Output Over Voltage Protection, Cycle-by-cycle Current Limiting (OCP), On-chip Thermal Shutdown, Over Load Protection (OLP) with Auto Recovery Mode Protection, etc.